Irrespective of whether you are just beginning a career in Information Technology or you are an experienced IT professional, earning a certification can benefit you immensely. There are numerous Cisco certifications you can explore to help you build the career you desire.
CCENT -Cisco Certified Entry Networking Technician certification is the first level of Cisco certification program. It can be easily earned by passing only one Interconnecting Cisco Networking Devices Part 1 (100-105 ICND1) exam.
But it’s really important to spend your time on getting CCENT certified because it opens a door to Cisco certification ladder in general. CCENT acts as a prerequisite for almost all next level CCNA certification, and even for CCDA. CCDA certification can be acquired by passing 200-310 (Designing for Cisco Internetwork Solutions (DESGN)) exam.
CCNP Routing and Switching Certification
CCNP Implementing Cisco Switched Networks (300-115 SWITCH) exam is a part of the CCNP Routing and Switching certification which provides the candidates with more in-depth knowledge in the switched networks. Cisco CCNP SWITCH 300-115exam helps learners develop their skills in planning, configuring, and confirming the implementation of multifaceted enterprise switching results that utilize the Cisco Enterprise Campus Architecture. Typically, the CCNP Routing and Switching certificate qualifies the candidates to work as a systems engineer, a network analyst, a network administrator and many more.
CCIE Routing and Switching Certification
The Cisco Certified Network Professional – Implementing Cisco Switched Networks (SWITCH) certification exam guarantees that the candidate acquires the knowledge and skills that are needed in the enterprise-networking field. In order to get CCNP Routing and Switching certificate, the applicants are required to pass the following certification test: Implementing Cisco IP Switched Networks – 300-115 SWITCH. The following non-expired certifications can act as prerequisites for the 300-115 SWITCH exam:
- CCNA Routing and Switching certification
- Any Cisco CCIE credentials
CCNA Routing and Switching Certification
To get CCNA Routing and Switching certification you need to pass:
- One 200-125 (Interconnecting Cisco Networking Devices: Accelerated) exam.
Check this useful 200-125 exam tutorial download Practice Testsas well at Prepaway.com
- Or two exams:
100-105 (Interconnecting Cisco Networking Devices Part 1 (ICND1)) exam.
200-105 (Interconnecting Cisco Networking Devices Part 2 (ICND2)) exam.
300-115 Exam Details
Time allocated for the exam:120 minutes
Number of questions:45–55
Minimum passing score required: Cisco does not publish the passing scores since each exam version includes a different set of question assessments that can be changed.
300-115 certification exam can be registered through the Pearson VUE website.
- Multiple-choicewith single/multiple answers
- Drag and drop
- Fill in the blank
- Layer 2 Technologies 65%
- Infrastructure Security 20%
- Infrastructure Services 15%
CCNA Security certification
To know more about Infrastructure Security topic, you can look through 210-260 Implementing Cisco Network Securityexam that is included in CCNA Security certification.
Candidates under 13 years are forbidden from sitting for the exam even with the approval of their parents. Candidates between the age of 13 and 17 can do almost every Cisco test, except CCDE and CCIE written. For example 400-101CCIE Routing and Switching written exam or 400-151 CCIE Data Center written exam, CCDE practical and CCIE labs provided they have parental approval.
Also please pay attention that individuals who are at least 18 years old can pass these tests with no restrictions.
- For failed Associate, Professional and Specialist exams: the candidate has to wait for 5 calendar days before retaking one of them.
- 15 calendar days are required for a failed Expert written exam.
- In case the candidates want to retake any exam they successfully passed, they must wait 180 days.
The candidates have a valid certification for three years after passing the exam. In order to recertify, individuals should successfully pass any of the 300-XXX professional-level exams, or the CCDE exam (either written or practical), the CCIEwritten test or hands-on exam lab, CCAr conference and its board assessment to extend the validity of lower-level certifications. The expiry date of all attained certificates is automatically renewed to match the expiry date of the newly achieved credential of a higher level.
The Subsequent Steps
In order to attain the Cisco Certified Network Professional Routing and Switching (CCNP R&S) certification, one should successfully pass the Implementing Cisco IP Switched Networks 300-115 (SWITCH) exam, which is one of the three required tests. Typically, after finishing the SWITCH (300-115) exam, the candidates have two options to choose from:
- Implementing Cisco IP Routing (ROUTE) – 300-101
- Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) – 300-135
When the candidates successfully pass the SWITCH exam, it is preferred to register for the ROUTE (300-101) test before registering for the TSHOOT (300-135) exam. By doing this, the students will get the opportunity to grasp the complex routing concepts and methods, which in return makes the learning process of the 300-135 exam materials much easier to understand.
When the candidates successfully pass all three certification exams required to attain the CCNP R&S certificate, they can start preparing for the Cisco Certified Internetwork Expert Routing and Switching credential, which is the last certificate in the Routing and Switching pathway.
Cisco Learning Solutions Partners and Cisco Learning Partners provide training program for the CCNP R&S certification and its exams that includes the following seven chapters:
Chapter 1: Key Concepts and Network Design. This discusses basic switch operation, PoE, LLDP and use of SDM templates.
Chapter 2: Campus Network Architecture. This covers the implementation of VLANs, trunks, DHCP for IPv4 and IPv6 and configuration of port aggregation.
Chapter 3: Scanning Tree Implementation. This includes the implementation and optimization of STP protocol, RPVSTP+, PVSTP+, and MSTP.
Chapter 4: Configuring Inter-VLAN Routing. This chapter covers how to configure routing on a multilayer switch.
Chapter 5: Implementing High Availability Networks. This explains how to configure SNMP, NTP, IP SLA, port mirroring, and verify VSS operation and StackWise.
Chapter 6: First Hop Redundancy Implementation. This discusses the implementation of First Hop Redundancy for IPv4 and IPv6.
Chapter 7: Campus Network Security. This chapter focuses on how to apply best practices to campus network security.
A helpful salary guidance is offered by the Payscale.com website to assist candidates to determine suitable salary range for job opportunities aligned with CCNP. The CCNP Routing and Switching certification holders, depending on their work experience, can get a salary that ranges from $41,022 to $133,590 per year as indicated by this website. Theses certification holders can occupy various job roles such as a Network Engineer, a Network Administrator or a Network Technician.
Also don’t forget that a CCNP Routing and Switching certification is a prerequisite for CCDP certification, and can be earned by passing three exams: 300-101 ROUTE, 300-115 SWITCH and 300-320 ARCH.
Tips & Tricks
A set of resources is provided by Cisco to assist learners in preparing for the CCNP R&S exams. The resources contain a survey of the study materials and practice tests that focus on the exam topics. Practice tests are considered an essential step to prepare individuals for the certification. Resource seekers can check the official Cisco website.
Practice exams play a very important role in preparing the candidates for the SWITCH test. Learners should take advantage of the available practice tests that Cisco provides for each certificate. The official Cisco website contains practice exams for every possible course.
Download Practice Tests at our website.
To guarantee that the future CCNP Routing and Switching certificate holders really understand the exam materials, they must perform practical labs as much as possible. The candidates can use Cisco Packet Tracer, a software that allows students to plan, design and configure sophisticated topologies. All devices in Cisco Packet Tracer are emulated, which means that they are operated almost as the real devices.